|
11)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 3000)
Posted 3388 days ago by Szopler So if tube is ok then must be something wrong with pulse forming section. Unsolder IC2, take a wire and connect pin 14 of uC to gnd few times to simulate pulses. LED should blink at every pulse. If it blinks then check pulse forming section - I mean C9,R9 and IC2 with surrounding elements... |
|
12)
Message boards :
News :
Detector V2.60 (KIT) Firmware Upgrade!
(Message 2998)
Posted 3389 days ago by Szopler I built it at Win7 x64 so why there are such problems? |
|
13)
Message boards :
News :
Detector V2.60 (KIT) Firmware Upgrade!
(Message 2996)
Posted 3389 days ago by Szopler Please try - Build for x86 |
|
14)
Message boards :
News :
Detector V2.60 (KIT) Firmware Upgrade!
(Message 2994)
Posted 3389 days ago by Szopler Hmm... Do you have .NET Framework 4.5 installed? |
|
15)
Message boards :
News :
Detector V2.60 (KIT) Firmware Upgrade!
(Message 2990)
Posted 3390 days ago by Szopler There is a bug in Firmware 1.0 that causes error in pulse counting. The higher is dose rate the greater is an error. Bug was caused by blocking delay that was used in 'beep' procedure. If you have "Radioactive@Home --- 2.60 ---" detector you can upgrade firmware by RS232 connection but if you don't know how to do it - don't do it! Here is an upgrade pack: Firmware Upgrade Pack Good luck! |
|
16)
Message boards :
News :
(no title)
(Message 2980)
Posted 3410 days ago by Szopler We want to thank all the participants for your support to our project and we wish you Merry Christmas and all the best in the new year! |
|
17)
Message boards :
News :
Third batch of KIT [Detector V2.61]
(Message 2968)
Posted 3428 days ago by Szopler Ad.1 There is no V3 detectors at now but it should become available at spring 2015. Ad.2 It is better for me to send one parcel because shipping cost to Italy is 5 Euro for 1..3 pcs. and 15 Euro for 10 pcs. in one parcel. Ad.3 If you know how to hold the soldering iron it is quite easy :). |
|
18)
Message boards :
News :
Third batch of KIT [Detector V2.61]
(Message 2961)
Posted 3442 days ago by Szopler oheunseok [SETIKAH@KOREA] - I just sent you a PM. |
|
19)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2949)
Posted 3460 days ago by Szopler Just nothing but you can modify firmware, add a menu or something... :). |
|
20)
Message boards :
News :
Third batch of KIT [Detector V2.61]
(Message 2938)
Posted 3491 days ago by Szopler Ja również zamawiam 1 szt. Płatność przez PayPal. A gdzie podać adres wysyłki? Najlepiej w komentarzu do transakcji PayPal :) |