Posts by ChertseyAl Add sensor

Posts by ChertseyAl

11) Message boards : Number crunching : GMC-320 Plus Counter Gets No Credit ? (Message 4071)
Posted 387 days ago by

I was mistaken, the Win 7 tasks are failing with:

Unable to open port COM104:34:09 (18316): called boinc_finish

But still a comms problem, and beyond my zero level experience :)

12) Message boards : Number crunching : GMC-320 Plus Counter Gets No Credit ? (Message 4070)
Posted 387 days ago by

ChertseyAl

All of your results on both machines seems to be terminating with:

Could not find any of the devices listed in sensors.xml: The specified device was not found

So, the tasks can't see the sensor for some reason.

No experience of this sensor type, so I don't have anything helpful to suggest, you'll have to wait for an expert :)

13) Message boards : Number crunching : Can't set location (Message 4048)
Posted 757 days ago by

ChertseyAl

Does the manual method not work?

http://radioactiveathome.org/boinc/forum_thread.php?id=499&nowrap=true#4046

14) Message boards : Number crunching : Validator down 20th November 2021 (Message 4013)
Posted 880 days ago by

ChertseyAl

And it's running again. Nice.

15) Message boards : Number crunching : Validator down 20th November 2021 (Message 4008)
Posted 886 days ago by

ChertseyAl

Validator not running ...

radac_validator_v3 radioactive Not Running

16) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 3963)
Posted 1118 days ago by

ChertseyAl

Hello, I decided to buy this sensor on Amazon.de

https://www.amazon.de/-/cs/gp/product/B00IN8TJYY/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

I ordered the sensor on March 28, 2021 and it was delivered to me on March 30, 2021. Today I connected the sensor to a PC with Win10 64bit. First, I downloaded USB drivers and GMC DataViewer from the manufacturer's website to detect the correct COM port. The connection of the sensor to the PC itself was without a problem and after a while the first task in BOINC started to be processed.

Unfortunately, it's not working ...

<core_client_version>7.16.11</core_client_version>
<![CDATA[
<stderr_txt>
Radac $Rev: 585 $ starting...
Could not find any of the devices listed in sensors.xml: The specified device was not found
Radac $Rev: 585 $ starting...
Could not find any of the devices listed in sensors.xml: The specified device was not found
14:43:38 (7648): called boinc_finish

17) Message boards : Number crunching : Validator down 11th April 2020 (Message 3952)
Posted 1202 days ago by

ChertseyAl

Can anyone here tell me if they are still doing wu's for this project?

Yes. All working very smoothly. Why the fuck did you hijack this old thread? What is your agenda here?

18) Message boards : Science : Detectors (Message 3932)
Posted 1428 days ago by

ChertseyAl

All of my tasks are going through valid but as 0 credits too. Have sensors set up (just as I used to on my old account a good few years back), but no joy credit wise :/

All of your tasks on the three active machines show ...

Could not find any of the devices listed in sensors.xml: The specified device was not found

... in the stderr logs, so the app isn't seeing the sensors

19) Message boards : Number crunching : Validator down 11th April 2020 (Message 3918)
Posted 1463 days ago by

ChertseyAl

Validator back up, pending units clearing slowly :)

20) Message boards : Number crunching : Validator down 11th April 2020 (Message 3916)
Posted 1463 days ago by

ChertseyAl

As an aside:
WTF are those peaks in your machine?

I suspect that's a result of direct sunlight on the sensor. Have seen the same thing with someone else in the past :)

Next 10 posts