Posts by aendgraend

1) Message boards : Number crunching : Valid WUs but no Points granted (Message 4187)
Posted 66 days ago by Profile aendgraend
Yes, I remember the “special features” of this map.

Now i attached my other Sensor to this Computer and it seems to be recognized, but now it shows a Port Opening Issue:

Stderr output

<core_client_version>8.0.4</core_client_version>
<![CDATA[
<stderr_txt>
Debug: Using port number: 1
Radioactive@Home app rev $Rev: 585 $ for GMC-300 starting...
COM1 opened for read/write
Debug: Port timeouts:
ReadTotalTimeoutConstant: 1000
ReadIntervalTimeout: 0
ReadTotalTimeoutMultiplier: 100
WriteTotalTimeoutMultiplier: 100
WriteTotalTimeoutConstant: 1000
gmc_GetVersion(): read failed
Unable to open port COM109:17:06 (6944): called boinc_finish

</stderr_txt>
]]>


I tested several different Ports 1, 3, 4, 5 - each one the same Issue

Stderr output

<core_client_version>8.0.4</core_client_version>
<![CDATA[
<stderr_txt>
Debug: Using port number: 5
Radioactive@Home app rev $Rev: 585 $ for GMC-300 starting...
Unable to open port COM510:33:12 (3852): called boinc_finish

</stderr_txt>
]]>


Port 1 is currently the only port where at the beginning of the stderr output it can be opnened but then at then end also shows "Unable to open port".
2) Message boards : Number crunching : Valid WUs but no Points granted (Message 4184)
Posted 67 days ago by Profile aendgraend

Probably been fscked up by a Windows 11 driver update :)



I guess that's the Case, as I recently updated the wonderful Windows 10 to the shitty eleven on my new Hardware.

So the project is for the arse finally as none cares for anything here.
3) Message boards : Number crunching : Valid WUs but no Points granted (Message 4182)
Posted 71 days ago by Profile aendgraend
Does anyone have any idea why my computer no longer gets points for completed and valid WUs? Apart from not being able to set a location (which is a very long known Bug), I can't find a problem with the sensor?
4) Message boards : News : New detectors... (Message 4080)
Posted 764 days ago by Profile aendgraend
it merrily clicks away.

...

You can disable the Buzzer (that's how it's called at this Website) in the Preferences settings, but that only works once you get a WU or if the Feeder is running at all - can't say exactly right now, as mine is continuing to click, even if i manually update the project every few seconds. Messages tell me Feeder isn't running, so no new WU at the moment.

But even if the Feeder will run again somewhen, you might get Mails or Messages within BOINC saying that the Location of your Sensor isn't set. I tried to set it maybe hundred times but it fails every time. One of my Sensors has a correct Location set, the other one doesn't and i keep getting notifications for that one's location.

Furthermore, it looks as if the input fields are reversed. Latitude and longitude have to be entered the other way round than you are used to.

5) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 3959)
Posted 1561 days ago by Profile aendgraend
Unfortunately it seems as it couldn't be shipped to Germany:

This item cannot be shipped to your selected delivery location. Please choose a different delivery location.
6) Message boards : News : New detectors... (Message 3721)
Posted 2376 days ago by Profile aendgraend
I would order 1.
7) Message boards : News : New detectors... (Message 3716)
Posted 2377 days ago by Profile aendgraend
I'd like to buy one too, but don't have a Patreon Account. Let me know if I can get one though.

BTW: Happy New Year :)
8) Message boards : Science : Message "Sensor has no location set" is coming again and again (Message 1760)
Posted 4417 days ago by Profile aendgraend
Hi,

great, thanks!

I've set the location once again. Let's see, how it'll work now.

Best Regards
aendgraend
9) Message boards : Science : Message "Sensor has no location set" is coming again and again (Message 1756)
Posted 4417 days ago by Profile aendgraend
Hi TJM,

And you're sure you read my Post completely? Just kidding...

"The first few times I got this Message" says I already got this Message. And I got it - I guess - at least 10 times so far.

And yes, I'm bored by Messages on the same Topic that happen to arrive more than once, even if I did as recommended.

These kind of Messages tell me, "the System behind" is not intelligent enough to recognize that I've set my Location already.

So the No Location setting isn't on purpose. If you can add the HostID 6876 on the Ignore List WITHOUT getting only half Credit then I'd appreciate.

At the Moment I'm getting ~14.1 Credits per WU on my other Host, and 0.00 on this Host, so the Calculation of "half the Credits" is broken too :-)))

This new Sensor really seems to have Issues...
The old one just works and works and works.
10) Message boards : Science : Message "Sensor has no location set" is coming again and again (Message 1742)
Posted 4422 days ago by Profile aendgraend
Hi,

I'm constantly getting this Message:

Hello,
your sensor connected to host wxyz has no location set. (Where wxyz is the 4-digit host id of one of my Machines) Please go to your hostpage and add a marker on the map.
...
Hosts with no location are granted only half of the credits.

This is an automated blablabla


The first few times I got this Message I did as recommended but now I'm getting a bit bored by that Mail.

How can I tell the Project Server that I've set all neccessary Settings in a Way that it remembers for it longer than say 2 Weeks?


Regards
aendgraend


Next 10 posts

Main page · Your account · Message boards


Copyright © 2025 BOINC@Poland | Open Science for the future