Posted 3271 days ago by Chris Skull
I did several times... on my device page the point of location is correct... i click several times to add sensor... but nothing at the big map..
Posted 3271 days ago by Chris Skull
OK, after a short journey to GB my sensor arrived back and works fine :)
The only problem left is that i can't see it at the map.
I set the location and add the sensor, but it will not appear in the map yet.
Very special thanks to KarmannGaz; DarkSoul and --Norbert for the great support ;-)
Posted 3289 days ago by Chris Skull
i have 190 Volts at the tube. Foto's here: http://1drv.ms/1DJlGRp
I triple check the soldering... can't find anything.
The problem with the buzzer is solved.. is quiet now :) but still no readings from tube.
Resistance without tube is around 27 MOhm
Posted 3298 days ago by Chris Skull
Thanks. I've followed these instructions, but it goes wrong at the point where I click on details - there is no map, just some details about my computer. I've sent a message to Szopler to see if he has any ideas.
Seems to be a browser Problem... with Firefox i also don't see any map... but with IE i works ;-)
Posted 3299 days ago by Chris Skull
Hello again... after 6 weeks waiting i finally got the display.
But now... i see 0.00 uSv/h and the buzzer is beeping non stop.
First unit:
core_client_version>7.4.42</core_client_version
Radac $Rev: 585 $ starting...
sensors.xml: 7 nodes found
Found sensor [unknown version 609 (2,61)]
553590,0,2015-4-22 17:3:39,f,9.2 minutes,0.0 cpm,0.00 uSv/h
793973,0,2015-4-22 17:7:39,n,4.0 minutes,0.0 cpm,0.00 uSv/h
1034125,0,2015-4-22 17:11:39,n,4.0 minutes,0.0 cpm,0.00 uSv/h
1274365,0,2015-4-22 17:15:39,n,4.0 minutes,0.0 cpm,0.00 uSv/h
1514401,0,2015-4-22 17:19:39,n,4.0 minutes,0.0 cpm,0.00 uSv/h
1753682,0,2015-4-22 17:23:39,n,4.0 minutes,0.0 cpm,0.00 uSv/h
1993907,0,2015-4-22 17:27:39,n,4.0 minutes,0.0 cpm,0.00 uSv/h
Trickle sent
2234318,0,2015-4-22 17:31:39,n,4.0 minutes,0.0 cpm,0.00 uSv/h
Trickle sent
WARNING: No readings from GM tube !
Done - calling boinc_finish()
19:31:39 (8576): called boinc_finish
Posted 3340 days ago by Chris Skull
Yes Dark Soul... i recognise that already :-P
Good eyes you have :D
Posted 3343 days ago by Chris Skull
hmmm in the Google doc above i find for C9 this link... http://www.mouser.de/ProductDetail/Murata/DEA1X3F150JP3A/?qs=%2fha2pyFadujcxkB4SX7j71HXiiD6%2fG0f%252bU6Sz2%2fOlM6k63mbo5vBig%3d%3d
but this is 15pF
Sorry i don't know what i have to order...
Posted 3343 days ago by Chris Skull
They told me here C9 is same as C12 ... 500V not necessary... ?? See Message 3088.
I ordered now all parts from 2 distributors... incl. shipping costs around € 50,-- and now i miss a resistor 33k that have to be in the kit.... i'm not lucky with this !!!
One more question... the cable from tube to massa.. how thick it must be ?
Posted 3345 days ago by Chris Skull
Hmmm, i guess i miss C19 Resistor 33k ?? There were one in the Kit but i need 2 ???
GGrrr....
Half the way now...
Posted 3353 days ago by Chris Skull
i miss C12.. ceramic capacitor... is it the same as C9 ?
Also i find a very small capacitor in the Kit... i don't know witch component it is...