1)
Message boards :
Cafe :
Milesones
(Message 2795)
Posted 3609 days ago by dskagcommunity 100k reached and a new badge :) |
2)
Message boards :
News :
World reactors on our map
(Message 2040)
Posted 3866 days ago by dskagcommunity http://ati.tuwien.ac.at/reaktor/ There is a link to the reactordata in english as PDF. Location: https://maps.google.at/maps?q=wien+atominstitut&ie=UTF-8&hq=&hnear=0x476d07450a0bb8ed:0xb67dc01e4e3a32b,Atominstitut,+1020+Wien&gl=at&ei=RWNAUr6FMsSVtAbnjIDYBw&sqi=2&ved=0CHEQtgMwCQ So one of my sensors are veryyy near to them ;) |
3)
Message boards :
Cafe :
Milesones
(Message 1922)
Posted 3926 days ago by dskagcommunity Yeah my first 10k and so i got my bronze badge! :) |
4)
Message boards :
Number crunching :
Buzzer
(Message 1874)
Posted 3941 days ago by dskagcommunity i would finish a workunit with buzzer settings -> off. at least with the next new WU, im sure it will go off ;) there is no need to unplug or such things. I connected two detector on two different machines and it works. Auto enable does not work with this series, so settings must be switched to "off" |
5)
Message boards :
Science :
Some possible ways to improve this project
(Message 1853)
Posted 3945 days ago by dskagcommunity Some good points i must say :) |
6)
Message boards :
Science :
Detector locations to avoid, to prevent a biased reading?
(Message 1852)
Posted 3945 days ago by dskagcommunity Florescent lights: Are they react with the detector too, when they are off? Whats the minimum distances to these things like the light and the smokedetectors? |
7)
Message boards :
News :
World reactors on our map
(Message 1844)
Posted 3946 days ago by dskagcommunity I want to cut in this research reactor question too. We have one with 250kW in Vienna and my second sensor will be mounted max. 500m Airline from it on sunday ;) So, do you add research Reactors onto the Map? |
8)
Message boards :
News :
Delayed detectors will be sent in a few days! [29.05.2013]
(Message 1775)
Posted 3973 days ago by dskagcommunity Ah good to know, because i was wondering about the >0,3 spike and no buzzer sounds ^^ |
9)
Message boards :
News :
Delayed detectors will be sent in a few days! [29.05.2013]
(Message 1773)
Posted 3974 days ago by dskagcommunity
Ok once the buzzer is running, it must be first shut off by setting with a new workunit, then you can Auto enable it back again and it stays silent until now ^^ |
10)
Message boards :
News :
Delayed detectors will be sent in a few days! [29.05.2013]
(Message 1767)
Posted 3977 days ago by dskagcommunity Great i got it, thx!! It seems to work correct ;) Edit: I set the buzzer to Auto enable too a while now ago, but it beeps anyway but i dont exceed the 0.3uSv Line. Edit again: Ok with Off it works now, i will test tommorow again with the Auto enable Function ^^ |