|
1)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2763)
Posted 3641 days ago by [AF>Amis des Lapins] Fredjke Hi folks, Hi Steve, did you try this type of capacitors, I've big issues trying to get small parts, As said above, I ordered parts that are 7mm thick which is better then the 8 mm specified above but even these ones are not fitting. I've seen the X7R from AVX company but they are sold at about 45 EUR (about 65 USD) each plus 30 USD transport back here in Belgium. For this price I order them by you and you'll have a couple of beer on my account :) |
|
2)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2608)
Posted 3660 days ago by [AF>Amis des Lapins] Fredjke Hi Szopler, And is the LCD needed for the µP to start ? Thanks. Frédéric. |
|
3)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2591)
Posted 3661 days ago by [AF>Amis des Lapins] Fredjke Busy building my BOM on Farnell components, I might have found all required pieces. I come up to 41 EUR and need 50 to be able to order as a private customer. I need to share command with someone else in Belgium or north of France(easier to meet when command arrives) Updated list with Right Capacitor. Sorry cannot edit the previous message. |
|
4)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2590)
Posted 3661 days ago by [AF>Amis des Lapins] Fredjke Here the link to the one in 7mm thickness : http://be.farnell.com/vishay-bc-components/bfc233922224/cap-film-pp-220nf-630v-rad/dp/1413839 |
|
5)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2588)
Posted 3661 days ago by [AF>Amis des Lapins] Fredjke Hello again, after some check on the data sheet, the capacitor I choose (Farnell ref: 2112870) is even wider then yours (conrad ref: 459097): 9mm thick instead of 8mm for the one on Conrad. Thanks ! PS : VISHAY BC COMPONENTS - BFC233922224 - CAP, FILM, PP, 220NF, 630V, RAD ref Farnell 1413839 is only 7mm thick. |
|
6)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2586)
Posted 3661 days ago by [AF>Amis des Lapins] Fredjke Thanks for sharing info ... I'll check the size of the 2 "big" capacitors. PS : any idea for the LCD display ? |
|
7)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2579)
Posted 3662 days ago by [AF>Amis des Lapins] Fredjke Busy building my BOM on Farnell components, I might have found all required pieces. I come up to 41 EUR and need 50 to be able to order as a private customer. I need to share command with someone else in Belgium or north of France(easier to meet when command arrives) For reference if it helps. I didn't build it yet but ready to order following : Short Ref. Price BUZ buzzer 2309140 € 0,69 C1, C4, C5, C6, C7, C14, C16 100nF 1457705 € 1,17 C2, C3 15pF 669647 € 1,00 C8, C15 100µF 8126160 € 0,64 C9 22pF/500V 2218625 € 0,27 C10, C13 220nF/630V 2112870 € 1,00 C11 4,7nF 2395775 € 0,02 C12 22pF 1740549 € 1,22 CON1 RS232 2356178 € 0,38 CON2 ISP 2356131 € 0,55 CON3 Mini USB-B 1841176 € 2,10 D1 LED 2112102 € 0,15 D2 UF4007 1467503 € 0,44 DISP1 I2C 2218947 € 14,31 DZ1, DZ4 5v1 1612363 € 0,13 DZ2, DZ3 3v6 1861444 € 0,04 Socket IC1 1674786 € 1,54 IC2 LM358N 2295980 € 0,27 Socket IC2 1674784 € 1,10 L1 10µH 2333630 € 0,19 L2 22µH 511614 € 1,90 R1 470 2329942 € 0,34 R2 10k 2329855 € 0,29 R3, R4 2k2 2329912 € 0,34 R5, R6 68 2329966 € 0,34 R7 1k5 2329891 € 0,34 R8 470k 2330154 € 0,40 R9, R13 220k 2330063 € 0,40 R10 200k 2330058 € 0,40 R11 68k 2330206 € 0,40 R12, R18 5M1 9469273 € 2,75 R14, R21 100k 2329987 € 0,40 R15, R16 10M 2329991 € 0,55 R17, R19 33k 2330110 € 0,40 R20 22k 2330068 € 0,40 SW1, SW2, SW3 tact switch 1813692 € 0,71 T1, T2, T3 BS170 2101401 € 0,90 VR1 10k 9353186 € 2,16 X1 20MHz 1842224 € 0,38 Total : € 41,01 I choosed the minimum quantity with direct availability. Some components are sold by pack of 50 :( Ready to adapt for more kits if it helps. |
|
8)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2557)
Posted 3668 days ago by [AF>Amis des Lapins] Fredjke Hello can you tell us which module and where you bought it from ? We might actually go for the same :) I've also some trouble finding only one USB header ... and small details. |
|
9)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2548)
Posted 3669 days ago by [AF>Amis des Lapins] Fredjke Hello and thanks for the kit, arrived yesterday ! One small remark for builders, the transfo is not marked on primary vs. secondary on the PCB. Check the plans to mount it the right way. I'll get all extra pieces needed and try to post a picture with it mounted or someone else can do if quicker ... :) Good Luck for building the kit. Cheers, Frédéric. |
|
10)
Message boards :
News :
New sensor (KIT) batch - SOLD OUT!
(Message 2239)
Posted 3762 days ago by [AF>Amis des Lapins] Fredjke Hello there, sent also 20 EUR for 1 kit. Eager to start participating on this project. |