|
11)
Message boards :
Number crunching :
using a GMC-300 for a project detector?
(Message 2269)
Posted 3761 days ago by Valter I think I solved it - and post here the solution in case anyone faces the same problem. I had defined maximum download/upload rates for my BOINC Manager. I eliminated these maximum rates (Tools - Computing Preferences). One Radioactive@home WU has finished since then, without problems. So I believe it solved the issue. Thanks again for all your help. Valter. |
|
12)
Message boards :
Number crunching :
using a GMC-300 for a project detector?
(Message 2268)
Posted 3762 days ago by Valter I believe so. Should I limit CPU use to X? |
|
13)
Message boards :
Number crunching :
using a GMC-300 for a project detector?
(Message 2266)
Posted 3762 days ago by Valter Good morning! I believe I have done wrong in opening a new thread for the message below. I apologize for the wrong behavior. Having settled down installation issues with your kind help in this thread, it was running smoothly until today, when various WUs started to show "Computing error". Sometimes, the following messages is shown: 14/1/2014 08:44:10 | Radioactive@Home | Output file sample_2805809_0_0 for task sample_2805809_0 absent It seems that the trickles are being sent correctly, but the WUs now continuously show computing errors, and no credits are now being given. Any ideas? Thanks, Valter. |
|
14)
Message boards :
Number crunching :
Computing error for WUs
(Message 2259)
Posted 3762 days ago by Valter Hi, everyone! Having settled down installation issues with your kind help in the other thread, it was running smoothly until today, when various WUs started to show "Computing error" and messages like this one below: 14/1/2014 08:44:10 | Radioactive@Home | Output file sample_2805809_0_0 for task sample_2805809_0 absent Any ideas? Thanks, Valter. |
|
15)
Message boards :
Number crunching :
using a GMC-300 for a project detector?
(Message 2203)
Posted 3766 days ago by Valter I have restarted the computer and unplugged/plugged the sensor. Now the WU reads: progress, 11.111%, elapsed 03:37:34, remaining 01:47:30. |
|
16)
Message boards :
Number crunching :
using a GMC-300 for a project detector?
(Message 2198)
Posted 3766 days ago by Valter It shows now 0.000% and does not move - elapsed time 01:27:25 and increasing. |
|
17)
Message boards :
Number crunching :
using a GMC-300 for a project detector?
(Message 2196)
Posted 3766 days ago by Valter Hi! I have installed the USB port, connected the GMC-300E and it was defined as COM3 port. I have downloaded your package, followed your instructions on this thread and changed the port to "3". The following messages were received: 10/1/2014 20:36:43 | | File projects/radioactiveathome.org_boinc/radac_1.77_windows_intelx86.exe not found 10/1/2014 20:36:43 | | File projects/radioactiveathome.org_boinc/sensors_1.77.xml not found 10/1/2014 20:38:01 | Radioactive@Home | update requested by user 10/1/2014 20:39:03 | Radioactive@Home | Sending scheduler request: Requested by user. 10/1/2014 20:39:03 | Radioactive@Home | Requesting new tasks for CPU 10/1/2014 20:39:07 | Radioactive@Home | Scheduler request completed: got 1 new tasks 10/1/2014 20:39:09 | Radioactive@Home | Starting task sample_2791425_0 using radac version 170 in slot 10 And the WU is now running... Is that it? Is it all correct, and the new sensor should be seen on the map, say by tomorrow? Thanks and regards, Valter. |
|
18)
Message boards :
Number crunching :
using a GMC-300 for a project detector?
(Message 2182)
Posted 3767 days ago by Valter Yes, Windows (sorry). Have just downloaded 195 and 196. Many thanks! |
|
19)
Message boards :
Number crunching :
using a GMC-300 for a project detector?
(Message 2180)
Posted 3767 days ago by Valter Hi, everyone! I have tried to download the gmc300.zip app file but it returns the message "Nie ma/nie bylo tu takiego pliku, lub zostal juz usuniety". Where can the app be found for download? Thanks, Valter. |