Posted 126 days ago by
Dingo
When are you going to put a Map back on the Devices so we can put in our Co Ordinates. I entered mine manually but not sure if they were right or not. Used to get more points if you had the map co ordinates set on the device ?
Posted 182 days ago by
Dingo
Same problem here unable to send or receive work packets.
Posted 737 days ago by
Dingo
All tasks sitting in Pending 24 Nov 2021. radac_validator_v3 radioactive Not Running
Posted 857 days ago by
Dingo
not a problem
Posted 1442 days ago by
Dingo
My last few tasks have failed with the message above. I am only using 13.9 of 32 gig of memory on my WIN 10 machine. Not sure if this is an error on my machine or something else ??
I will try another machine later.
This is an example http://radioactiveathome.org/boinc/result.php?resultid=11139686
Stderr output
<core_client_version>7.14.2</core_client_version>
<![CDATA[
<message>
couldn't start app: Can't get shared memory segment name: shmget() failed</message>
]]>
[/url]
<core_client_version>7.14.2</core_client_version>
<![CDATA[
<message>
couldn't start app: Can't get shared memory segment name: shmget() failed</message>
]]>
Posted 1712 days ago by
Dingo
Every time I disconnect the sensor or turn the power off to the computer I get the same message:
Radac $Rev: 585 $ starting...
Could not find any of the devices listed in sensors.xml: The specified device was not found
585 does not appear in the sensors.xml
<sensors>
<sensor>
<hardware_id>16c0:05df</hardware_id>
<revision>257</revision>
<revision_bcd>1.01</revision_bcd>
<vendor>obdev.at</vendor>
<product>DataStore</product>
<usb_protocol>1</usb_protocol>
<options>
<switch_gmsupply>1</switch_gmsupply>
<txt_line1>1</txt_line1>
<txt_line2>1</txt_line2>
<reset_counters>1</reset_counters>
<switch_buzzer>1</switch_buzzer>
<switch_backlight>1</switch_backlight>
</options>
</sensor>
<sensor>
<hardware_id>16c0:05df</hardware_id>
<revision>513</revision>
<revision_bcd>2.01</revision_bcd>
<vendor>obdev.at</vendor>
<product>radioactiveathome.org GRS</product>
<usb_protocol>1</usb_protocol>
<options>
<switch_gmsupply>1</switch_gmsupply>
<reset_counters>1</reset_counters>
<switch_buzzer>1</switch_buzzer>
<switch_backlight>1</switch_backlight>
</options>
</sensor>
<sensor>
<hardware_id>16c0:05df</hardware_id>
<revision>593</revision>
<revision_bcd>2.51</revision_bcd>
<vendor>obdev.at</vendor>
<product>radioactiveathome.org GRS</product>
<usb_protocol>1</usb_protocol>
<options>
<reset_counters>1</reset_counters>
<switch_buzzer>1</switch_buzzer>
<switch_backlight>1</switch_backlight>
</options>
</sensor>
<sensor>
<hardware_id>16c0:05df</hardware_id>
<revision>594</revision>
<revision_bcd>2.52</revision_bcd>
<vendor>obdev.at</vendor>
<product>radioactiveathome.org GRS</product>
<usb_protocol>1</usb_protocol>
<options>
<reset_counters>1</reset_counters>
<switch_buzzer>1</switch_buzzer>
<switch_backlight>1</switch_backlight>
<buzzer_alert>1</buzzer_alert>
<lcd_avg_opts>1</lcd_avg_opts>
</options>
</sensor>
<sensor>
<hardware_id>16c0:05df</hardware_id>
<revision>595</revision>
<revision_bcd>2.53</revision_bcd>
<vendor>obdev.at</vendor>
<product>radioactiveathome.org GRS</product>
<usb_protocol>1</usb_protocol>
<options>
<reset_counters>1</reset_counters>
<switch_buzzer>1</switch_buzzer>
<switch_backlight>1</switch_backlight>
<buzzer_alert>1</buzzer_alert>
</options>
</sensor>
<sensor>
<comment>3.01</comment>
<hardware_id>04d8:f6fe</hardware_id>
<revision>769</revision>
<revision_bcd>3.01</revision_bcd>
<vendor>microchip</vendor>
<product>radioactiveathome.org GRS</product>
<usb_protocol>1</usb_protocol>
<options>
<switch_gmsupply>1</switch_gmsupply>
<reset_counters>1</reset_counters>
<switch_buzzer>1</switch_buzzer>
<switch_backlight>1</switch_backlight>
</options>
</sensor>
<sensor>
<comment>2.60</comment>
<hardware_id>16c0:05df</hardware_id>
<revision>608</revision>
<revision_bcd>2.60</revision_bcd>
<vendor>radioactiveathome.org</vendor>
<product>Radiation Detector KIT</product>
<usb_protocol>1</usb_protocol>
<options>
<switch_gmsupply>1</switch_gmsupply>
<reset_counters>1</reset_counters>
<switch_buzzer>1</switch_buzzer>
<switch_backlight>1</switch_backlight>
</options>
</sensor>
</sensors>
Posted 1739 days ago by
Dingo
Thanks fixed now
Posted 1740 days ago by
Dingo
double post
Posted 1740 days ago by
Dingo
I had my computer off for a week while I was away from home and now it cannot attach to the sensor again.
Radac $Rev: 585 $ starting...
Could not find any of the devices listed in sensors.xml: The specified device was not found
Radac $Rev: 585 $ starting...
Could not find any of the devices listed in sensors.xml: The specified device was not found
Posted 1938 days ago by
Dingo
OK it was fixed for a while and I am getting the same error again. I have a sensor this is from a WU that worked:
Stderr output
<core_client_version>7.12.1</core_client_version>
<![CDATA[
<stderr_txt>
Radac $Rev: 585 $ starting...
sensors.xml: 7 nodes found
Found sensor v2.01
23580,5,2018-8-7 15:50:46,f,0.4 minutes,12.7 cpm,0.07 uSv/h
263140,67,2018-8-7 15:54:46,n,4.0 minutes,15.5 cpm,0.09 uSv/h
502700,158,2018-8-7 15:58:46,n,4.0 minutes,22.8 cpm,0.13 uSv/h
742250,233,2018-8-7 16:2:46,n,4.0 minutes,18.8 cpm,0.11 uSv/h
980810,313,2018-8-7 16:6:46,n,4.0 minutes,20.1 cpm,0.12 uSv/h
1220360,396,2018-8-7 16:10:46,n,4.0 minutes,20.8 cpm,0.12 uSv/h
1459920,471,2018-8-7 16:14:46,n,4.0 minutes,18.8 cpm,0.11 uSv/h
Trickle sent
--------------------------------
This is from one that just started:
Radac $Rev: 585 $ starting...
Could not find any of the devices listed in sensors.xml: The specified device was not found
Radac $Rev: 585 $ starting...
Could not find any of the devices listed in sensors.xml: The specified device was not found
--------------------------------
I looked in the sensors.xml file and there is not an entry for
<revision>585</revision>
<revision_bcd>2.01</revision_bcd>
I am not sure if that has anything to do with it but it needs to be fixed again.