Posts by foovax

1) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 3191)
Posted 3475 days ago by foovax
I have a copy of linux source for this but unsure of how current it is.

radac_1.77_rev585

It had bugs and I also had to have a bash script that would check and restart things but when it was working it seemed to do what was needed.
2) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 2272)
Posted 3914 days ago by foovax
This project doesn't use a lot of cpu so no limit on that would be required. It's basically just polling the serial port/usb port to check what the current measurement is and logging it. Then occasionally it uploads that information to the server.

What is the output of your logs? Maybe the detector is coming unplugged or losing connection?
3) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 2199)
Posted 3919 days ago by foovax
Try restarting the computer or unplugging then plugging in the USB to the GMC-300.
4) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 2178)
Posted 3920 days ago by foovax


This chart seems a bit high.

In the stderr.txt i see a version of:

<GETVER>> returned GMC-300Re 2.38
5) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 2176)
Posted 3920 days ago by foovax
What is the status on the linux version?

And adjusting the charts/graphs to show a more accurate result ~(-0.7)
6) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 2149)
Posted 3928 days ago by foovax
If using windows try the last one posted by TJM.

http://www.enigmaathome.net/static/3786x0d6xp/gmc300.zip

But there are some differences on how this is used and they are at the top of the thread.
7) Message boards : Science : Strange spike noticed on 2 stations (Message 2134)
Posted 3940 days ago by foovax
My station:



Another station across the state:


12 hour difference with odd spike.

Another station closer to mine didn't pick up anything:


Truck driving down the interstate?
8) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 2090)
Posted 3967 days ago by foovax
Should I use the new version or wait till sensor id is fixed?

EDIT: Disregard the last comment was intended for a different version than what I have.
9) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 2077)
Posted 3975 days ago by foovax
I'm still watching the thread and ready to test any new linux versions that you have.

Thanks!
10) Message boards : Number crunching : using a GMC-300 for a project detector? (Message 2006)
Posted 4046 days ago by foovax
Still stuck after the end of one unit moving to the next

Radioactive@Home app rev $Rev: 188 $ for GMC-300 starting...
Trying to open: /dev/ttyUSB0


I also ran a full work unit with Rev:188 and received same message above with no progress. Still have to manually start.


Next 10 posts

Main page · Your account · Message boards


Copyright © 2024 BOINC@Poland | Open Science for the future