|
11)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2816)
Posted 3587 days ago by sorcrosc Thank you appu A couple of dumb questions: C11: I don't know what exactly means monolithic. I placed there a ceramic disk. May be fine? R2,R4: I have not put them because I have the expander. Are them absolutely needless? |
|
12)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2814)
Posted 3588 days ago by sorcrosc I have finished to build the detector but it doesn't works. I have a display with i2c expander and I think the display is broken. Should the detector start if the expander is good but not the display? |
|
13)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2679)
Posted 3657 days ago by sorcrosc Not really, resistors have their max voltage limit. With two 5.1M resistors the voltage across them splits in half. If you change them to 10M and 200k, the first one will work at nearly 400V which is probably far out of spec for a resistor of this size. Yes, the 10M I found are rated 350V. Thanks |
|
14)
Message boards :
Cafe :
KIT - Discussion [topic OPEN]
(Message 2669)
Posted 3658 days ago by sorcrosc I have a question: If i read the scheme correctly I can replace the two 5.1M resistors with one 10M and one 200K. This could be a shopping list optimization because both these resistors are already in the list. Is it right? |
|
15)
Message boards :
News :
Second batch of KIT [Detector V2.60] - 100% SOLD!
(Message 2668)
Posted 3658 days ago by sorcrosc Just sent 20€ for one kit. Lorenzo M. Thanks |