|
11)
Message boards :
Science :
New Mouser BOM for v2.61
(Message 3111)
Posted 3346 days ago by Holger Weiss Hey guys, here is my version of a Mouser BOM for the v2.61 kit. It's based on display variant 1 (with expander) but it does not contain the display, as mouser does not provide this type. You can get the display at sainsmart, on ebay or aliexpress for €10,- I ordered this one: http://www.ebay.de/itm/Neu-SainSmart-IICI2CTWI-1602-Serial-LCD-Module-Display-For-Arduino-UNO-MEGA-R3-/320906534218 Except the display everything you need is in the list (maybe a little more). If you don't need the optional connectors Con1 and Con2 remove them from the list. As it is always a good idea to use sockets with ICs I added them for IC1 and IC2. If you feel lucky and you think you don't need them, go ahead, skip em. For the display I added a socket and a straight connector, as I am planning to replace the angled connector that comes with the display. Again, you could skip these 2 positions and use the original connector, bend it straight and solder it directly to the board. I'm not a fan of that idea. You possibly will find some cheaper parts but at the time of my research, these were the cheapest without lead time. Feel free for any questions. http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8e6392be0d |
|
12)
Message boards :
News :
Third batch of KIT [Detector V2.61]
(Message 2931)
Posted 3504 days ago by Holger Weiss I order 1. Will pay via pp szopler@gmail.com |