Message boards : Number crunching : Can't set location
Author | Message |
---|---|
Hello there, | |
ID: 2860 | Rating: 0 | rate:
![]() ![]() ![]() | |
please delete | |
ID: 3691 | Rating: 0 | rate:
![]() ![]() ![]() | |
please delete. | |
ID: 3692 | Rating: 0 | rate:
![]() ![]() ![]() | |
please delete | |
ID: 3693 | Rating: 0 | rate:
![]() ![]() ![]() | |
I lost my connections to the project a while ago, because I had used a fixed IP in my host file, about wich I forgot. Therefore I could not even reach this pages her for help. | |
ID: 3979 | Rating: 0 | rate:
![]() ![]() ![]() | |
If some admin is reading this and can do something about it: | |
ID: 3982 | Rating: 0 | rate:
![]() ![]() ![]() | |
Hi, | |
ID: 3983 | Rating: 0 | rate:
![]() ![]() ![]() | |
Hi, | |
ID: 3984 | Rating: 0 | rate:
![]() ![]() ![]() | |
Could it be possible to just write the coordinates somewhere instead of an interactive map? | |
ID: 3985 | Rating: 0 | rate:
![]() ![]() ![]() | |
I've just got the second mail with a reminder:
But still nothing changed, I cannot put my location anywhere but here. ____________ Gruesse vom Saenger | |
ID: 3986 | Rating: 0 | rate:
![]() ![]() ![]() | |
I've just got the second mail with a reminder:
But still nothing changed, I cannot put my location anywhere but here. ____________ Gruesse vom Saenger | |
ID: 3987 | Rating: 0 | rate:
![]() ![]() ![]() | |
I just got the third mail of this spam, and still nothing has been done at all by the project. I've just got the second mail with a reminder: ____________ Gruesse vom Saenger | |
ID: 3993 | Rating: 0 | rate:
![]() ![]() ![]() | |
Double post, sorry, but you spammed me as well. | |
ID: 3994 | Rating: 0 | rate:
![]() ![]() ![]() | |
And the next spam has just arrived. I just got the third mail of this spam, and still nothing has been done at all by the project. ____________ Gruesse vom Saenger | |
ID: 4000 | Rating: 0 | rate:
![]() ![]() ![]() | |
I keep on getting this eMails too, since I had to put the sensor on a new PC. Seems like nobody from the site is reading this any more? | |
ID: 4001 | Rating: 0 | rate:
![]() ![]() ![]() | |
I keep on getting this eMails too, since I had to put the sensor on a new PC. Seems like nobody from the site is reading this any more? See here in their main forum, they don't care. ____________ Gruesse vom Saenger | |
ID: 4002 | Rating: 0 | rate:
![]() ![]() ![]() | |
I keep on getting this eMails too, since I had to put the sensor on a new PC. Seems like nobody from the site is reading this any more? One and a half month, and two spam mails with useless content, farther, and still absolutely nothing has happened. Loud and telling silence by those who obviously don't care about this abandoned project. ____________ Gruesse vom Saenger | |
ID: 4003 | Rating: 0 | rate:
![]() ![]() ![]() | |
Clearly, no map, no location possible. | |
ID: 4004 | Rating: 0 | rate:
![]() ![]() ![]() | |
Clearly, no map, no location possible. Yes, but at least the coordinates should be possible to insert, now nobody knows where the nuclear accident happened, if my detector shows up something in the mS range instead of µS. So my detector is just a detector somewhere unknown. ____________ Gruesse vom Saenger | |
ID: 4005 | Rating: 0 | rate:
![]() ![]() ![]() | |
At least you have a graph and getting half credits. My sensor is lit up and working fine, but I can no longer run tasks for this project as it says there is no app which will run on my Linux box (it's lying, there is, I haven't changed the computer just upgraded to a newer version of Linux). So I have a pretty USB geiger counter and that's it. Nobody else can see it but me. It's a pity, this was a fun project while it had support, but I feel nobody has the technical knowledge to answer/fix these problems now. :( | |
ID: 4014 | Rating: 0 | rate:
![]() ![]() ![]() | |
Sorry, double post, my fault. | |
ID: 4015 | Rating: 0 | rate:
![]() ![]() ![]() | |
At least you have a graph and getting half credits. My sensor is lit up and working fine, but I can no longer run tasks for this project as it says there is no app which will run on my Linux box (it's lying, there is, I haven't changed the computer just upgraded to a newer version of Linux). So I have a pretty USB geiger counter and that's it. Nobody else can see it but me. It's a pity, this was a fun project while it had support, but I feel nobody has the technical knowledge to answer/fix these problems now. :( I guess you followed the instructions in this thread. ____________ Gruesse vom Saenger | |
ID: 4016 | Rating: 0 | rate:
![]() ![]() ![]() | |
Yes, but at least the coordinates should be possible to insert I have four fields, the first two empty. What am I supposed to give in as data? ____________ | |
ID: 4029 | Rating: 0 | rate:
![]() ![]() ![]() | |
Yes, but at least the coordinates should be possible to insert I should insert N 53° 03.717' E 008° 48.674' (or whatever form the coordinates are supposed to have:
| |
ID: 4030 | Rating: 0 | rate:
![]() ![]() ![]() | |
Hello Saenger, | |
ID: 4032 | Rating: 0 | rate:
![]() ![]() ![]() | |
At least you have a graph and getting half credits. My sensor is lit up and working fine, but I can no longer run tasks for this project as it says there is no app which will run on my Linux box (it's lying, there is, I haven't changed the computer just upgraded to a newer version of Linux). So I have a pretty USB geiger counter and that's it. Nobody else can see it but me. It's a pity, this was a fun project while it had support, but I feel nobody has the technical knowledge to answer/fix these problems now. :( An upgrade to a newer version of Linux may have removed needed files, or substituted newer versions without needed lines. What did you do in the previous version to get the project going? ____________ | |
ID: 4033 | Rating: 0 | rate:
![]() ![]() ![]() | |
Hello, I would like to add my 39252 sensor to the map, but I still can't. How should I proceed correctly? Thank you | |
ID: 4041 | Rating: 0 | rate:
![]() ![]() ![]() | |
ID: 4042 | Rating: 0 | rate:
![]() ![]() ![]() | |
Hello, I would like to add my 39252 sensor to the map, but I still can't. How should I proceed correctly? Thank you Wait for Godot ;) ____________ Gruesse vom Saenger | |
ID: 4043 | Rating: 0 | rate:
![]() ![]() ![]() | |
Can't set my location (in the Netherlands). | |
ID: 4047 | Rating: 0 | rate:
![]() ![]() ![]() | |
Does the manual method not work? | |
ID: 4048 | Rating: 0 | rate:
![]() ![]() ![]() | |
Does the manual method not work? If it did my detector would have sprung to live on the project, but not a single detector is 'live' in the Netherlands at the moment -see map. The map also shows only one reactor here, while there are four, three active (Petten -experimental, Delft -educational, Borssele) and one deactivated (Dodewaard). ____________ | |
ID: 4049 | Rating: 0 | rate:
![]() ![]() ![]() | |
Does the manual method not work? No, it doesn't. I can insert what I want, it doesn't change anything. Neither under Windows/Chrome nor under Linux/FF. ____________ Gruesse vom Saenger | |
ID: 4050 | Rating: 0 | rate:
![]() ![]() ![]() | |
(Warning: Issues discussed here (today april,14 2022) may already be solved if s.o. reads some hours later!) | |
ID: 4052 | Rating: 0 | rate:
![]() ![]() ![]() | |
In the end I solved it by attaching my sensor to another (Windows) system and even managed -don't ask me with which version of tried settings- to add my sensor on the map. Latitude: ##.##### degrees North (of the Equator) - Longitude: ##.##### degrees East (of Greenwich) seems too simplistic, you could also be South of the Equator and/or West of Greenwich, so I also tried with added N and E in my settings. ____________ | |
ID: 4054 | Rating: 0 | rate:
![]() ![]() ![]() | |
Does the manual method not work? I did work, it just never ever did show up on my computer's detail page. No map and no coordinates there, but after a wee while my detector showed up on the map. Worked as well as I moved the detector to my new computer (same place, just faster, but that's irrelevant here), but only the next day, not asap. Patience you must have. ____________ Gruesse vom Saenger | |
ID: 4055 | Rating: 0 | rate:
![]() ![]() ![]() | |
Congratulations, Saenger | |
ID: 4056 | Rating: 0 | rate:
![]() ![]() ![]() | |
Message boards :
Number crunching :
Can't set location