New detectors release soon!


Advanced search

Message boards : News : New detectors release soon!

Author Message
Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1172 - Posted: 26 Jun 2012 | 15:43:55 UTC

Within a few days are going to announce a new collection of orders for our volunteers.
As before, we will collect your order from you for about a month and then proceed to the production of sensors. New batch will be about 250 - 300 pcs.

With this collection, will launch a new model.


Despite the changes on CPU and a few other expensive changes, we managed to keep the price at the same level of 27 Euro.

Also with new release we will publish diagrams and software on our website.

Be patient and give us just few days to organise ;)

____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile ChertseyAl
Avatar
Send message
Joined: 16 Jun 11
Posts: 149
Credit: 375,519
RAC: 150

Message 1173 - Posted: 26 Jun 2012 | 18:42:19 UTC - in response to Message 1172.

I'll be ordering one of those! Looks great!

Going to put it by my window in my office, as I never got around to relocating the sensor I have in my workshop.

Looks quite long, not that that is a problem for me. Dimensions? Is that a 'normal' USB connection of one of the smaller types?

Oh, someone remind me the minimum version required to run this project please?

Cheers,

Al.

____________

Profile Saenger
Send message
Joined: 16 Jun 11
Posts: 134
Credit: 358,209
RAC: 134

Message 1174 - Posted: 26 Jun 2012 | 18:56:59 UTC - in response to Message 1172.

As I definitely want to have one of those myself again, I could organize again the German orders.

Here's for my fellow countrymen and -women:
Innerhalb von ein paar Tagen werden wir eine neue Runde Bestellungen für unsere Freiwilligen bekannt geben. Wie bisher werden wir für ca. 1 Monat Bestellungen einsammeln, und dann mit der Produktion beginnen. Die neue Ladung wird 250-300 Stück gross sein.

Mit dieser Sammlung werden wir ein neues Modell herausbringen [Foto oben im Zitat]

Trotz der Änderungen an der CPU und einiger anderer teurer Änderungen haben wir den Preis auf dem selben Niveau bei 27€ halten können.

Mit der neuen Ausgabe werden wir natürlich auch die Schaltbilder und die Software auf unserer Seite veröffentlichen.

Seid ein wenig geduldig, und gebtb uns ein paar Tage zum Organisieren ;)


Da ich auch so ein Teil haben will, kann's gerne wieder über mich laufen, falls der Wettermann nicht schon alles organisiert hat.
____________
Gruesse vom Saenger

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1175 - Posted: 26 Jun 2012 | 19:16:40 UTC - in response to Message 1173.

Oh, someone remind me the minimum version required to run this project please?

BM version? 6.x?
Our detector doesn't have any special requirements...
Also, our developer have running it with... NAS!

Also, works with RaspberryPi under Debian for ARM...


____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1176 - Posted: 26 Jun 2012 | 19:29:02 UTC - in response to Message 1175.

Saenger - done :)
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile ChertseyAl
Avatar
Send message
Joined: 16 Jun 11
Posts: 149
Credit: 375,519
RAC: 150

Message 1177 - Posted: 26 Jun 2012 | 20:14:08 UTC - in response to Message 1175.

Oh, someone remind me the minimum version required to run this project please?

BM version? 6.x?


Oops. Meant BOINC version :)

It'll have to be the ghastly Vista Laptop that I attach it to then.

Cheers,

Al.

____________

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1178 - Posted: 26 Jun 2012 | 20:17:00 UTC - in response to Message 1177.

It works with WinXP (and above), Linux (2.6 and above), BoincManager 6.x (and above) and detector dimensions are about 22cm X 3cm(diameter).
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile abyss
Send message
Joined: 18 Dec 11
Posts: 15
Credit: 44,784
RAC: 0

Message 1179 - Posted: 27 Jun 2012 | 0:44:02 UTC

Great news!
Hope there will be no problem with popular Ubuntu x64.

If anyone from Ireland / Limerick area want to join to my order just give me a shout.


Pozdrowienia :)

Nvgnte
Avatar
Send message
Joined: 16 Jun 11
Posts: 1
Credit: 41,394
RAC: 0

Message 1180 - Posted: 27 Jun 2012 | 8:36:48 UTC

Looks really good :)

I guess people who already "pre-signed" a few months ago (like myself :p) will be included, right?
____________
La Tierra de un Dios que no supo aceptar / su falso derecho a la libertad - Tierra Santa
Bájate mi primer eBook: Amaneceres - 8 relatos cortos de fantasía y un toque de terror

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1181 - Posted: 27 Jun 2012 | 12:17:10 UTC - in response to Message 1180.

Yes, I have database with people who declare to buy 190 detectors at the moment.
When we get ready, I will send confirmation enquire email to all of them.
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile Saenger
Send message
Joined: 16 Jun 11
Posts: 134
Credit: 358,209
RAC: 134

Message 1182 - Posted: 27 Jun 2012 | 16:46:50 UTC - in response to Message 1178.

It works with WinXP (and above), Linux (2.6 and above), BoincManager 6.x (and above) and detector dimensions are about 22cm X 3cm(diameter).

What's the minimum Android working with it? And does it have a battery, so that no external power is needed from the USB?
____________
Gruesse vom Saenger

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1183 - Posted: 27 Jun 2012 | 17:29:56 UTC - in response to Message 1182.

What's the minimum Android working with it? And does it have a battery, so that no external power is needed from the USB?

Good question...
We still haven't android app ready to use (mainly, because we still wait for VID and PID numbers from Microchip) and the only person who have enough knowledge to do it (NativeBOINC author) is really busy with his other work.
As I have checked at the moment, new detector get enough power from my tablet to work and is recognised in 4.0.3 systems. Doesn't work with Android lower than 3.2 (as USB communication under 2.3.6 not support full USB standards).

Obviously when we get Radioactive@Home Android application done we will publish it source as well.
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile Ascholten
Send message
Joined: 17 Sep 11
Posts: 112
Credit: 525,421
RAC: 0

Message 1184 - Posted: 27 Jun 2012 | 21:24:04 UTC - in response to Message 1183.

I notice the readout has another number in it 0403 ?? what is that?

Aaron

Oh and PS. for the yanks and rednecks. the size is roughly 10 inches by 1 inch. Your standard stick of dynamite :D

Aaron
____________


Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1185 - Posted: 27 Jun 2012 | 21:35:28 UTC - in response to Message 1184.

I notice the readout has another number in it 0403 ?? what is that?

It's just some feedback - will not exists on production firmware.
But, Ryszard will release a testing application for debugging purposes - based on it maybe somebody will write something interesting?
Your standard stick of dynamite :D

:D
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1195 - Posted: 30 Jun 2012 | 17:25:37 UTC - in response to Message 1185.

For those, who wants to make batch orders (for countries, teams, etc).
Send me PM or email to krzyszp (-a-t-) radioactiveathome dot org with quantities before Wednesday, 4th July, 8.00pm GMT+1 (UK time), please.

I will book detectors for them before we start collect money from other persons.
Everybody, who register through form before will be asked for confirmation in next 3 days via email provided.

Everybody who wants to order less than 5 detectors, please ignore this message.
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Stone
Send message
Joined: 5 Jul 12
Posts: 7
Credit: 22,777
RAC: 0

Message 1198 - Posted: 11 Jul 2012 | 11:06:48 UTC
Last modified: 11 Jul 2012 | 11:24:24 UTC

Hi, I am new to the project and would like to pick up a detector. I just have a couple of questioins.

Do you ship to Canada? If you do, do you accept payment from Paypal? I can work around the The Paypal issue if you do not accept payment from them.

I would like to get in on this order and get a detector. I sent you a PM a few days ago about this.

Thanks in advance,

Stone
____________




Profile ChertseyAl
Avatar
Send message
Joined: 16 Jun 11
Posts: 149
Credit: 375,519
RAC: 150

Message 1199 - Posted: 11 Jul 2012 | 17:34:47 UTC - in response to Message 1198.
Last modified: 11 Jul 2012 | 17:35:31 UTC


Do you ship to Canada? If you do, do you accept payment from Paypal?


I'm not an admin of this project, but there is already one user in Canada (not me though), and I paid for my sensor via Paypal.

So I'm guessing you'll be ok :)

Cheers,

Al.
____________

Stone
Send message
Joined: 5 Jul 12
Posts: 7
Credit: 22,777
RAC: 0

Message 1200 - Posted: 11 Jul 2012 | 20:56:12 UTC - in response to Message 1199.
Last modified: 11 Jul 2012 | 21:06:01 UTC

Yes, if I had checked my e-mail earlier, I would have known that too. I have been quite busy with the doctors this week. Nothing serious, just maintenancce! hehe

I am not the best when it comes to reading e-mails, I am used to using the PMs and the forums for a lot of this stuff. I will get better at doing it.

I used to work in IT and was married to my e-mail - lived and died by it so to speak, so now I don't work, I am awful about checking my e-mail...as I said I will keep a closer eye on it now I know it's used by more then one or two BOINC projects that send out automated messages when you have had an issue with the path to your Java install, or something like that.

I guess I better set up a better profile and put in my forum picture if I am going to be spending any time on the forums. I am very excited to be involved in this project - I live within 60 KMs of two nuclear power stations and I am curious about the conditions here in Toronto, not to mention the chance to help on another science project.

Looking forward to getting all set up and going on this. Hope you are planning on making this a long term study, I think this project has a lot of relavence in the world we live in today. My father was a nuclear engineer building plants all over the world when I was a teenager. At one point I lived within 3 to 5 KMs of the cores of multiple power stations for a year, that always made me nervous.

Thank you for the info ChertseyAl, and thanks for the e-mail Krzysztof, I sent you a brief reply.

Thanks again,

Stone
____________




galazyng
Send message
Joined: 18 Dec 11
Posts: 4
Credit: 0
RAC: 0
Message 1201 - Posted: 12 Jul 2012 | 23:04:40 UTC
Last modified: 12 Jul 2012 | 23:21:35 UTC

Can I have one? I am polish from Warsaw. What are the next step to buy detector

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1203 - Posted: 13 Jul 2012 | 14:21:43 UTC - in response to Message 1201.

I'm sorry for delay, but my (one) week holiday I spent mainly in hospitals. Now everything should by ok and we will start orders collection soon :)

Answering all your questions - yes, we will ship detectors to (I think) every country, but quantity are restricted to 300pcs (well, about 200 are already reserved for people registered before and groups/teams). :)
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

predatoraf
Send message
Joined: 13 Jul 12
Posts: 1
Credit: 11,256
RAC: 0

Message 1204 - Posted: 13 Jul 2012 | 15:05:14 UTC

Po co dwóch Polaków pisze po angielsku? :)

A jaka będzie w przybliżeniu cena urządzenia?

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1205 - Posted: 13 Jul 2012 | 15:35:15 UTC - in response to Message 1204.

Bo na tym forum niezbyt często się nasi odzywają, a przekazywałem przy okazji informacje dla wszystkich :)

W Polsce cena czujki będzie w granicach 125pln (może być do 5pln różnicy) + 10pln przesyłka.
Akcja zbiórki zamówień (i przedpłat) odbędzie się za parę dni.

Przy okazji - bardzo żywe dyskusje o projekcie są na forum naszego teamu (BOINC@Poland) pod adresem http://www boincatpoland.org/smf/
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Stone
Send message
Joined: 5 Jul 12
Posts: 7
Credit: 22,777
RAC: 0

Message 1213 - Posted: 15 Jul 2012 | 22:15:38 UTC - in response to Message 1203.
Last modified: 15 Jul 2012 | 22:18:45 UTC

I'm sorry for delay, but my (one) week holiday I spent mainly in hospitals. Now everything should by ok and we will start orders collection soon :)

Answering all your questions - yes, we will ship detectors to (I think) every country, but quantity are restricted to 300pcs (well, about 200 are already reserved for people registered before and groups/teams). :)


I am so sorry to hear that you got sick on your one week off. That's not good. I have a long term injury from the Army and I am 100% disabled, so I see a lot of doctors. I hope whatever happened with you is clearing up quickly and that you are feeling better now. I am so sorry to hear that your one week vaction was spent in hospitals and with doctors. It's not a good thing.

As for 300 units, I would just like to get the one for the one machine I am planning on running the project on...hehe Actually I have about 6 or 7 machines currently running BOINC on them right now, but I can only afford to get the one detector for this project, for now.

I am also rebuilding another 6-8 PCs just to run BOINC on. I have a friend who was running a retail PC store, but he went out of business, so I got some really good deals on a bunch of desktop PCs. It's just going to take me some time to build them up into working machines due to my injuries though.

Will you be sending out emails about the ordering, or posting up a new thread on the boards? I want to know where to watch out for the announcement if at all possible.

Thanks,

Stone
____________




galazyng
Send message
Joined: 18 Dec 11
Posts: 4
Credit: 0
RAC: 0
Message 1217 - Posted: 16 Jul 2012 | 19:50:22 UTC - in response to Message 1205.

fajnie, proszę pamiętać o mnie ;-) mój serwer chodzi od kilku lat i nie zamierzam go wyłączać, a dzięki detektorowi będzie bardziej wykorzystany, taka sieć urządzeń przyda się z wielu względów, a między innymi takich, że Polskę nie ominie w przyszłości wybudowanie elektrowni atomowej, no w sumie jeden reaktor Marię już mamy ;-)

Christian
Send message
Joined: 19 Jul 12
Posts: 1
Credit: 0
RAC: 0
Message 1219 - Posted: 19 Jul 2012 | 8:25:55 UTC

Hi,

I am new here :-) I would like to participate on this Project could you help me to get a detector?

Cheers

Christian

Profile Saenger
Send message
Joined: 16 Jun 11
Posts: 134
Credit: 358,209
RAC: 134

Message 1220 - Posted: 19 Jul 2012 | 17:59:46 UTC - in response to Message 1219.

Hi,

I am new here :-) I would like to participate on this Project could you help me to get a detector?

Cheers

Christian

Dem Manne kann geholfen werden ;)
You've got PM and Mail ;)

____________
Gruesse vom Saenger

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1226 - Posted: 22 Jul 2012 | 20:04:16 UTC - in response to Message 1220.

We have collected already about 300 orders through form provided before (currently switched off) and also I have managed all yours team/national batch orders.
Tomorrow I will send to registered persons confirmation email with bank account number and exact amount (including postage fee) to transfer.
Also, we decide to make about 100 additional detectors using our own money and we will sell it with this batch when we assembly all detectors.
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile dskagcommunity
Avatar
Send message
Joined: 27 Oct 11
Posts: 29
Credit: 520,742
RAC: 292

Message 1229 - Posted: 23 Jul 2012 | 21:41:33 UTC

Wow it looks very great! Cant wait to hold one in my hand and connect it :)
____________
http://www.research.dskag.at

Vienna-1200:


Vienna 1030:

LiborA
Send message
Joined: 24 Jul 12
Posts: 1
Credit: 0
RAC: 0
Message 1232 - Posted: 24 Jul 2012 | 14:29:25 UTC

Hi, I find this project today and I´d like order one senzor for me. What I have to do?

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1233 - Posted: 25 Jul 2012 | 11:39:49 UTC - in response to Message 1232.

As soon as I get confirmation from previously registered persons and get final info about quantity ordered by them we will publish info about quantity available for others. I hope this take no more than a week.

____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

PX9e
Send message
Joined: 26 Jul 12
Posts: 1
Credit: 0
RAC: 0
Message 1237 - Posted: 26 Jul 2012 | 11:32:50 UTC

Hello,

Do you have an estimate time before you unleash plans ?

My Best Regards


PX9e

Claggy
Send message
Joined: 29 Jul 12
Posts: 9
Credit: 149,374
RAC: 0

Message 1260 - Posted: 29 Jul 2012 | 19:27:34 UTC - in response to Message 1233.

I'm also after a detector or two,

Claggy

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1263 - Posted: 31 Jul 2012 | 13:19:57 UTC

Preparing everything and sending to our volunteers will take about 8-10 weeks (with possible small delay as usually).
Is very hard to give time plan as we can't predict how long time it's take to collect orders and we still doesn't have everything confirmed from previously registered persons.
I.e. In form sent by email I have 358 detectors as "confirmed" but to bank account and PayPal arrive only money for about 100 detectors. So we need to wait a week or so to count orders to order right amount of PCB's, Geiger tubes and LCD's (which parts are longest to wait for or most expensive).
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Stone
Send message
Joined: 5 Jul 12
Posts: 7
Credit: 22,777
RAC: 0

Message 1268 - Posted: 4 Aug 2012 | 17:34:56 UTC

Krzysztof,

Once you get the payments for the detectors, and the new form filled out (as per the e-mail that was sent out), will you be sending out a confirmation of payment received? I am just wondering.

Thanks in advance,

Stone

____________




Profile X@PEK
Avatar
Send message
Joined: 5 Aug 12
Posts: 1
Credit: 0
RAC: 0
Message 1269 - Posted: 5 Aug 2012 | 4:23:07 UTC

Hello

I am from Russia. I want to order one detector. You can send a detector in Russia? How much will it cost (shipping + detector)? It is advisable that you sent the detector with the tracking number. Since our mail works very badly. The parcels without tracking number are often lost or delivered in 3-4 months.

----In Russian.---

Здравствуйте.

Я из России. Хочу заказать один детектор. Вы можете отправить детектор в Россию? Сколько это будет стоить (доставка+детектор)? Желательно что бы вы отправили детектор с номером для отслеживания посылки. Так как наша почта работает очень плохо. И посылки без номера для отслеживания часто теряются или доставляются через 3-4 месяца.

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1273 - Posted: 6 Aug 2012 | 12:47:23 UTC - in response to Message 1269.

News about how to order detector are published now.
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile Saenger
Send message
Joined: 16 Jun 11
Posts: 134
Credit: 358,209
RAC: 134

Message 1311 - Posted: 19 Aug 2012 | 18:32:49 UTC

I just got two reminder mails from r@h, that I ordered 1 and 0 detectors, and that I have to confirm it.
I already have paid, confirmed, got the money transfer confirmed and gave you my address for 39 detectors, did you just press some wrong button?

I said to my "customers" to simply ignore that message.
____________
Gruesse vom Saenger

tomasz
Send message
Joined: 20 Jan 12
Posts: 6
Credit: 0
RAC: 0
Message 1312 - Posted: 19 Aug 2012 | 18:48:03 UTC - in response to Message 1311.

Same for me , just reconfirmed it .

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1314 - Posted: 19 Aug 2012 | 22:49:44 UTC - in response to Message 1311.

I said to my "customers" to simply ignore that message.

Good :)
I have no idea, why those message comes to you.

____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile Kyong
Avatar
Send message
Joined: 29 Mar 12
Posts: 6
Credit: 149,764
RAC: 0

Message 1315 - Posted: 20 Aug 2012 | 9:06:50 UTC

The same to me, got two e-mails even if I have already paid and confirmed it.

Profile Nikolay A. Saharov
Send message
Joined: 16 Jun 11
Posts: 4
Credit: 226,154
RAC: 122

Message 1316 - Posted: 21 Aug 2012 | 19:20:17 UTC

And me too...

Stone
Send message
Joined: 5 Jul 12
Posts: 7
Credit: 22,777
RAC: 0

Message 1317 - Posted: 25 Aug 2012 | 15:49:43 UTC

I also got an 2nd email asking me to confirm my order of 1 detector - I just ignored it since I have already confirmed with you that you have my payment and my shipping info.

I will keep you posted on if I get any more.

Stone
____________




Profile Kyong
Avatar
Send message
Joined: 29 Mar 12
Posts: 6
Credit: 149,764
RAC: 0

Message 1337 - Posted: 29 Aug 2012 | 16:43:36 UTC

I have asked for confirmation about my payment but got none.

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1338 - Posted: 29 Aug 2012 | 16:50:07 UTC - in response to Message 1337.
Last modified: 29 Aug 2012 | 16:51:01 UTC

Yes, everything is fine.
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile Saenger
Send message
Joined: 16 Jun 11
Posts: 134
Credit: 358,209
RAC: 134

Message 1361 - Posted: 14 Sep 2012 | 16:38:00 UTC

Any news about the current batch?
How long will it take until the first ones are shipped, and how long for the last ones?
____________
Gruesse vom Saenger

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1362 - Posted: 14 Sep 2012 | 17:54:20 UTC - in response to Message 1361.

If LCD's comes without delay we will send first detectors about 15th of next month.
All detectors will be send within 4-5 weeks from first parcel.
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Profile abyss
Send message
Joined: 18 Dec 11
Posts: 15
Credit: 44,784
RAC: 0

Message 1371 - Posted: 26 Sep 2012 | 1:37:02 UTC

Have you any sending policy? I mean - for example - first goes locations with a lowest density of sensors, "border" regions - etc?

Stone
Send message
Joined: 5 Jul 12
Posts: 7
Credit: 22,777
RAC: 0

Message 1372 - Posted: 26 Sep 2012 | 6:32:04 UTC

Hey Krzysztof,

How are you doing? A little stressed out with this new batch of detectors going out, I bet...

I am ready, and waiting for the detector, and eager to get going with the project!

Will you be sending out e-mails when the detectors ship? Or will we just get them when we get them? I understand it depends on other suppliers and on conditions that you do not control 100% of. I am just wondering...

Respectively,

Stone
____________




Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 1375 - Posted: 27 Sep 2012 | 22:43:30 UTC - in response to Message 1372.
Last modified: 27 Sep 2012 | 22:53:17 UTC

Good news :)
About end next week we will start sending detectors (v3) to you.

We will send it in small batches as person who assembly parts send it to us in 30-50pcs sets every week (starting on next).

Currently we have received "test" series of 30pcs - we will do some quick tests to be sure that everything is assembled correctly.

Ps. Are you find that we haven't delay on this batch??? I'm surprised ;)
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

ryszard.korczyk
Send message
Joined: 14 Jan 12
Posts: 3
Credit: 487,158
RAC: 0

Message 1444 - Posted: 4 Nov 2012 | 10:56:04 UTC

Hi all.
Sorry all for the delay in the shipment of detectors. We are trying to finish the production as soon as possible, to start shipping. Not everything goes as planned. It can be difficult to reconcile private life, work and volunteer work related to rad@h. 6 November will start mass shipping.
Today we will present how we produce sensors. It's really a complicated process.
Ryszard Korczyk

jacek
Send message
Joined: 6 Nov 12
Posts: 10
Credit: 0
RAC: 0
Message 1453 - Posted: 6 Nov 2012 | 21:42:55 UTC

Please let us know when we can order the new batch. I would like to participate in this (Alabama, USA). Also, wouldn't it be possible to continuously produce the detectors, stockpile them, and take orders as they came in? If you spread a word about it in Japan, the demand for these should be mind boggling. I see only one right now on the map.

jacek
Send message
Joined: 6 Nov 12
Posts: 10
Credit: 0
RAC: 0
Message 1457 - Posted: 7 Nov 2012 | 14:53:04 UTC

One more thing. Can one of the new batch sensors be ordered as a kit or be able to be taken apart? I would like to experiment with alternative GM tubes (off line and off grid only).

Also, If I purchase a few as gifts for friends, will they be able to register the detectors with the BOINC network separately from my own account?

Thanks and looking forward to the new batch.

Jacek

Profile starchild
Send message
Joined: 21 Apr 12
Posts: 6
Credit: 1,801
RAC: 0
Message 1472 - Posted: 15 Nov 2012 | 16:36:26 UTC

So, is the latest batch actually shipped/built/in preparation?

Karikola
Avatar
Send message
Joined: 20 Oct 12
Posts: 6
Credit: 184,253
RAC: 142

Message 1477 - Posted: 16 Nov 2012 | 16:43:03 UTC

Hallo,

I want to order one detektor .

karikola

Profile mimeqProject donor
Send message
Joined: 24 Jun 11
Posts: 4
Credit: 429,799
RAC: 135

Message 1479 - Posted: 18 Nov 2012 | 6:20:16 UTC

Here is shown how produced our sensors (in polish). It takes a lot of time:

http://www.boincatpoland.org/smf/radioactivehome/jak-powstaja-nasze-czujki-v3-)/

Profile starchild
Send message
Joined: 21 Apr 12
Posts: 6
Credit: 1,801
RAC: 0
Message 1480 - Posted: 18 Nov 2012 | 17:17:18 UTC

Ok, at last some pictures of the production. I did not know that it is a one-man show. Maybe its ready as a christmas present?

Lord Comage
Send message
Joined: 9 Nov 12
Posts: 1
Credit: 0
RAC: 0
Message 1483 - Posted: 24 Nov 2012 | 3:40:22 UTC

I just joined the project a week ago and know I'm past the pre-order time for detectors. I heard that extras will be made from this batch and be sold through the website. Is there a timeframe for when that will happen?

R/S

Scott

Profile Clairet Herve Thomas Francoise
Send message
Joined: 26 Nov 11
Posts: 1
Credit: 285,310
RAC: 151

Message 1486 - Posted: 27 Nov 2012 | 21:50:03 UTC

Hello,

I ordered and paid a detector on the 01/08/2012 (31 €) with a regularization on the 08/08/2012 (1,50 €). I would wish to know at which date it will be delivered to me.

My address of delivery is the following one:

CLAIRET Herve
14 rue des Fauvettes
80090 AMIENS
FRANCE

My bill-to-address is the following one:

CLAIRET Hervé
13 rue Soufflot
80090 AMIENS
FRANCE

The numbers of transactions on PAYPAL were the following:

5D973341V4257463C
8J5975531N5398937)

Cordially.

Profile dskagcommunity
Avatar
Send message
Joined: 27 Oct 11
Posts: 29
Credit: 520,742
RAC: 292

Message 1487 - Posted: 28 Nov 2012 | 17:19:34 UTC

It is not the best to post all data on a open place like here ^^ its better to make a privat message.
____________
http://www.research.dskag.at

Vienna-1200:


Vienna 1030:

Profile Saenger
Send message
Joined: 16 Jun 11
Posts: 134
Credit: 358,209
RAC: 134

Message 1488 - Posted: 30 Nov 2012 | 5:54:28 UTC

I know you're volunteers, and I know it's probably tough to get it all done, but I would nevertheless appreciate, if you were a bit more forthcoming in regard of estimated times of delivery.

I paid in June, and we were told it would take about 8-10 weeks, perhaps a bit delay as usual. That would have been some time in September. As I'm responsible for a batch of 39 detectors for Germany, the others always ask me, why there still is no detector ready. I simply can't tell them anything, as you remain mainly silent. No reason given for this excessive delay, no new estimated delivery time given, next to no information at all.

With good explanations we will probably still be grumbling a bit, but as we are all just volunteers ourselves, we would probably just say "Shit happens", but without any communication from the project, there's some anger building up.
____________
Gruesse vom Saenger

Szopler
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 139
Credit: 354,460
RAC: 140

Message 1491 - Posted: 1 Dec 2012 | 23:03:45 UTC
Last modified: 1 Dec 2012 | 23:07:28 UTC

At that time only one person has theme of detectors on his head... Unfortunately, this person now has a lot of responsibilities at work and do not knead with producing sensors. He spends every free moment at montage and sensors will be for sure. I'll try to ask him for a schedule of shipments and let you know.

Profile Kyong
Avatar
Send message
Joined: 29 Mar 12
Posts: 6
Credit: 149,764
RAC: 0

Message 1492 - Posted: 2 Dec 2012 | 20:36:22 UTC

Thanks, I am also very courious about status.

ryszard.korczyk
Send message
Joined: 14 Jan 12
Posts: 3
Credit: 487,158
RAC: 0

Message 1493 - Posted: 4 Dec 2012 | 22:26:54 UTC

First of all I would like to apologise to everyone for such a massive delay.

When we started collecting money for 3rd batch of detectors we decided, a little too enthusiastically, to release a new revision of the detector. We've had mastered the manufacturing process for ver.2. Version 3 had been released in a small prototypical batch. Version 3 also appealed to many people visually, and this fact weighed heavily on our decision. Nobody however realised how long would it take to prepare a longer production run. There also were a couple of issues that were discovered in beta version, that also needed to be taken care of.

Another cause for the delay was our attempt to reduce manufacturing costs. We do all the production on our own and some processes, especially preparation of transformers and chassis takes quite a lot of time. The chassis looks interesting, but it requires processing on a CNC machine. Caps require reaming and the openings need to be drilled through. Lastly, the labeling sticker needs to be applied and a hole for LCD display needs to be cut out. The printed circuit boards are also manufactured by us. Reputable manufacturing workshops demanded prohibitively high prices for production of such relatively small batch, with profitability threshold at 1000+ boards. Smaller and cheaper workshops on the other hand had high defect rates. PCBs manufactured by them had short circuits, rotated elements and overheated laminates. We decided therefore to manufacture PCBs by ourselves using a template for application of soldering paste and an oven for actual soldering. This too proved to be difficult at first. Too much paste on microcontroller's pins caused short-circuits. In effect I've had to remove the processor from each PCB, clean it, and solder it again (here's another delay). Before installing the PCB in chassis, it's edges need grinding, so that it fits in the pipe.

In other words, a couple of unplanned issues summed up into a bigger delay. On top of that, I planned to work on detectors after my day job. I assumed I'd have to work 8 hours a day, but my employee pressed me hard, and I often had to devote more than 10 hours a day to my job. There were days where I would start at 7 a.m. and finish at 2 a.m. the following day. During such periods there was no chance to do anything with detectors, sometimes even for a week or so.

How I am going to amend the situation: I am in no way backing away from the project. I commited to it, and I'm going to finish what I started. Trust me, there is still quite a lot of work with these detectors. Things at work start coming back to normal, and I can now expect to have a couple of hours each day to work on them. I'm planning to take a couple of days off too. I also started to organise a team of people who will help me to press forward. I also need to evaluate if I can utilise Szopler's and kotfryc's eagerness to help. Just today I have prepared a software update which enables displaying on the LCD converter's voltage, USB voltage and USB communication status. That should help in debugging if any users report problems. It's enough to hold down the button during powering up, and debug data will be displayed instead of 'Radioactive@home'. This update also delayed the deliveries as I didn't want to ship detectors without any means of diagnosing them.

Schedule:

Approximately 45 detectors are completed, 40 PCB's are ready without transformers and waiting to be tested. Another 50 PCBs with RC elements and 50 empty PCBs. We are also expecting a shipment of another 100 PCBs from the manufacturer. I have a dozen or so transformers ready for installation. Next Sunday I plan on manufacturing a number of those, as I managed to optimise this process recently. I declare to make 10 daily, but I want to do as much as 20 if possible. However, there might be days when I'm travelling due to my daytime job (Dec 6th and 7th). Next Saturday I plan to devote entirely to detectors' production. Having two other people to help I expect to do at least 40 pcs. I am also constantly looking for ways to improve our processes.

Last, but not least, please hold your emotions. This does not work well on morale. I admit I screwed up, and I am doing whatever I can to do my part. Please take notice, that we do not profit from manufacturing detectors, we donate our time and try to make detectors as cheap as possible, so that everyone can afford them. Our detectors are much more sophisticated than QCN detectors, which consist of a cable, a chassis and a PCB with an accelerometer and a couple of elements.

From now on I am going to provide you with daily status updates.

Getting back to soldering USB cables.
Ryszard Korczyk

Claggy
Send message
Joined: 29 Jul 12
Posts: 9
Credit: 149,374
RAC: 0

Message 1495 - Posted: 5 Dec 2012 | 1:10:24 UTC - in response to Message 1493.

Thanks for the update,

Claggy

Profile [AF>Libristes] erik
Avatar
Send message
Joined: 29 Mar 12
Posts: 18
Credit: 292,402
RAC: 148

Message 1496 - Posted: 5 Dec 2012 | 2:00:30 UTC

Thanks for your job.

Regards, erik
____________
Just a poet

Profile Saenger
Send message
Joined: 16 Jun 11
Posts: 134
Credit: 358,209
RAC: 134

Message 1497 - Posted: 5 Dec 2012 | 8:04:51 UTC

Thanks for that information, I very much appreciate your effords.
If you provide more status updates about this, we all will pat you on the back virtually probably on a daily base, if it will not hinder your soldering.

I'll forward this to my "customers", so they will know how you work, and why it took you longer than first thought. Methinks it's a general problem with volunteer projects and initial enthusiasm, that's been met by the hard reality of the RL.
____________
Gruesse vom Saenger

Profile Saenger
Send message
Joined: 16 Jun 11
Posts: 134
Credit: 358,209
RAC: 134

Message 1523 - Posted: 18 Dec 2012 | 5:38:28 UTC - in response to Message 1493.

From now on I am going to provide you with daily status updates.


Not that I ever expected this overeager sentence to be true, and it's absolutely no problem to live without this daily news, but I would appreciate a weekly update, probably after the (work-)weekends.

I don't want to be too demanding, and I appreciate it, that you update the sensors to the new, better VID/PID scheme before sending them, and thus delaying them even more, I just would like to be a bit better informed.
____________
Gruesse vom Saenger

Fracka-c
Send message
Joined: 9 Apr 13
Posts: 3
Credit: 0
RAC: 0
Message 1686 - Posted: 9 Apr 2013 | 9:45:24 UTC

hello
i need a detector, how to buy it?

Stone
Send message
Joined: 5 Jul 12
Posts: 7
Credit: 22,777
RAC: 0

Message 1782 - Posted: 16 Jun 2013 | 14:19:25 UTC
Last modified: 16 Jun 2013 | 14:23:26 UTC

Ryszard,

It's Stone, from Canada, and I just wanted you to know that I have received the detector that you have sent to me. I have attached it to the computer that I will be using it on for this project, and everything is going well so far!

As of June 16 2013, I have turned in 21 WU tasks so far, and everything seems to be running just great. I have added it to the map, and gotten it setup in the preferences.

Thank you for all the hard work that you have put into this project to get it going.

Thanks again,

Stone
____________




Frank
Send message
Joined: 22 Jun 13
Posts: 16
Credit: 0
RAC: 0
Message 1824 - Posted: 28 Jun 2013 | 21:13:57 UTC

Hello, I joined the forum to learn about this project and want to add a sensor to my station. I sent some emails out hoping to get some answers but yet to receive any replys at all. How can someone purchase, obtain a sensor so I can join in. I live in Massachusetts in the USA, near the border to New Hampshire and if you look at the map, I have 4 reactors around me. I would very much appreciate if someone could tell me how I can get a sensor to I can set up one here at my location. It would fill in an area that is not covered here but there are others further away and mine would fill in this spot... So I post here on the forum hoping for answers....thank you in advanced Frank

miki_e
Send message
Joined: 28 Sep 12
Posts: 20
Credit: 216,788
RAC: 37

Message 1873 - Posted: 10 Jul 2013 | 8:03:21 UTC - in response to Message 1824.

You can buy anytime (and directly in US) a standalone detector GMC-300 directly from the company manufacturing it:

http://www.gqelectronicsllc.com/comersus/store/comersus_viewItem.asp?idProduct=4542

It is more expensive, but you have at the same time a portable, battery operated standalone detector for general use...

It is now supported in radioactiveathome project (still in beta, but already working...).

See the corresponding thread in news: http://radioactiveathome.org/boinc/forum_thread.php?id=195

P.S. It is of no use to be upset of not having received personalized ordering info: All the information you request has been already posted here (and several times...), please read the messages.....

chillomatic
Send message
Joined: 8 Feb 13
Posts: 14
Credit: 0
RAC: 0
Message 1919 - Posted: 22 Jul 2013 | 21:48:32 UTC

I want one too ! Been waiting for month, where do i sign up?!?!?

geox
Send message
Joined: 31 Jul 13
Posts: 5
Credit: 1,124
RAC: 0
Message 1948 - Posted: 1 Aug 2013 | 16:17:52 UTC

Hi,
I'm a new here, I'm from Italy and I temporarily added a sensor yesterday using a GMC-300.
Unfortunately this device get quite hot staying continuously connected to USB power and this is what happened to another user after 3 weeks:

http://commodore.fi/gmc_300_plus_pwrsupply.jpg

For this reason I'm just sending data for few hours/day for now but I would be happy to send more time/data using an official detector as in my zone there are no other detectors... May I be added in next volunteers detectors order?

foovax
Send message
Joined: 15 Mar 13
Posts: 41
Credit: 47,598
RAC: 0

Message 1949 - Posted: 1 Aug 2013 | 22:20:10 UTC - in response to Message 1948.

In the forum where that image came from they mentioned to remove the rechargeable battery if it's in use on USB in a constant on state.

geox
Send message
Joined: 31 Jul 13
Posts: 5
Credit: 1,124
RAC: 0
Message 1950 - Posted: 2 Aug 2013 | 13:18:49 UTC

Hi, in that forum is just the owner of the broken device to propose the idea of removing the battery but he does not tell if really tried to do it or not. The GMC manufacturer just answered to him advising to replace the broken battery without commenting about his idea of removing it. Also even if the device could work correctly in USB mode without the battery I think that removing it the device would be hot the same after few hours and opening the cover the warranty would be lost... This is the reason I think to join the project with an official detector is a better idea considering that the GMC costs about 200eur with shipping and custom costs and for this reason is not a good idea to risk to broke it for too many hours under USB power...

Michael D.
Send message
Joined: 22 Aug 13
Posts: 1
Credit: 0
RAC: 0
Message 1978 - Posted: 22 Aug 2013 | 19:44:33 UTC

Hi,

I want to order such an device, but since june there are no new news how to obtain it.

Low_Gap
Send message
Joined: 17 Aug 13
Posts: 5
Credit: 0
RAC: 0
Message 1980 - Posted: 24 Aug 2013 | 18:41:33 UTC

I would also like to order a detector when your next batch is ready so that I can join your project.

appu
Send message
Joined: 18 Sep 13
Posts: 14
Credit: 166,696
RAC: 139

Message 2030 - Posted: 18 Sep 2013 | 13:35:44 UTC

Hey Guys,

first i would let you know that this is a realy fantastic idea & project :)

And i would like to Order 1-2 Sensors.
One -maybe the second also- would be located in Germany about 15km away from a Nuclear Power Plant.

If you still have sensors to ship please provide payment instructions

If not please count me in for the next batch

Kind regards from germany
andreas

Roft
Send message
Joined: 7 Oct 13
Posts: 1
Credit: 0
RAC: 0
Message 2045 - Posted: 7 Oct 2013 | 16:32:06 UTC

I would like to Order 1 sensor.
Krzysztof Piszczek: see PM.

Tamara
Send message
Joined: 9 Sep 13
Posts: 33
Credit: 186
RAC: 0
Message 2046 - Posted: 8 Oct 2013 | 8:38:08 UTC - in response to Message 1493.



From now on I am going to provide you with daily status updates.

Getting back to soldering USB cables.
Ryszard Korczyk


Hi, Ist now 10 months ago u tell to give a Status Update..

I wait till i Joined to get a Detector but nothing come about a new Release Date.
____________

cpy
Send message
Joined: 17 Oct 13
Posts: 2
Credit: 0
RAC: 0
Message 2059 - Posted: 17 Oct 2013 | 8:22:51 UTC - in response to Message 2046.

Where can i get one in Slovakia? How much does this thing cost?

Profile James Ruggles
Avatar
Send message
Joined: 8 Oct 13
Posts: 3
Credit: 0
RAC: 0
Message 2060 - Posted: 19 Oct 2013 | 3:33:54 UTC

I need to get a sensor when they are available, how do I go about doing this or getting my name down for one. Are they still 27 euro's? I live in the USA in West Virginia.

Profile Greg*
Send message
Joined: 15 Oct 11
Posts: 10
Credit: 27,451
RAC: 0

Message 2062 - Posted: 27 Oct 2013 | 14:25:04 UTC

Hi,

I'm OK for buying one detector. Can you tell me how to proceed?

Thank you.

ShortlegCats
Avatar
Send message
Joined: 21 Dec 12
Posts: 38
Credit: 0
RAC: 0
Message 2064 - Posted: 29 Oct 2013 | 7:30:38 UTC

I'm not the big wheel around here, but according the the forum posts, there will be a post made when detectors are available for order.

Radison
Send message
Joined: 9 Apr 13
Posts: 1
Credit: 0
RAC: 0
Message 2072 - Posted: 12 Nov 2013 | 10:17:05 UTC

Hello

I'm interested in a long time.
I would like to order 1 detector

thx

gemm
Send message
Joined: 13 Nov 13
Posts: 2
Credit: 0
RAC: 0
Message 2075 - Posted: 14 Nov 2013 | 12:24:14 UTC

One detector for me please. How is the process oft ordering ?

Stauffer Yvan
Send message
Joined: 14 Nov 11
Posts: 1
Credit: 0
RAC: 0
Message 2091 - Posted: 23 Nov 2013 | 21:17:47 UTC

Je souhaite acheté un détecteur ! Quel est le prix et comment faire pour un acheter un?

SVP mettre en première page du site comment faire pour en acheter un!!!

Merci d'avance

GrafZahl
Send message
Joined: 26 Nov 13
Posts: 2
Credit: 0
RAC: 0
Message 2093 - Posted: 26 Nov 2013 | 7:20:35 UTC - in response to Message 2091.

I'm also interested in a detector - GrafZahl.

Frank
Send message
Joined: 22 Jun 13
Posts: 16
Credit: 0
RAC: 0
Message 2097 - Posted: 27 Nov 2013 | 23:37:07 UTC

Ok, so I am back to try this again after 2 attempts over a year. How does it look for getting one of these detectors? I have tried twice over a year and no luck, no answers, no replies and seems that alot of postings are getting pretty old and with no answers. I would like very much to join, but will need a sensor to do this. So, the main question is, how are these looking and any better chance of getting one now after all this time has past. Thank you Frank

Screaming97135Eagle
Send message
Joined: 12 Sep 13
Posts: 1
Credit: 0
RAC: 0
Message 2100 - Posted: 28 Nov 2013 | 13:25:27 UTC - in response to Message 2097.

I also would like to put my name down to order a sensor. Like other people I have been waiting quite a while to get one.

Profile Fabio Tomaselli (Sicilia)
Send message
Joined: 9 Dec 12
Posts: 21
Credit: 182,274
RAC: 0

Message 2101 - Posted: 28 Nov 2013 | 14:37:43 UTC

I too

NomadicRT
Send message
Joined: 14 Nov 12
Posts: 6
Credit: 0
RAC: 0
Message 2110 - Posted: 5 Dec 2013 | 15:19:54 UTC

I also would appreciate some communication to users,have waited over 12 months and very little info in that time and still no sensor available.

Frank
Send message
Joined: 22 Jun 13
Posts: 16
Credit: 0
RAC: 0
Message 2146 - Posted: 1 Jan 2014 | 13:47:31 UTC

All thou these sensors seem to be nice, but hard to get, perhaps, since a lot of us have multiple geiger counters now in use, maybe we could just use them. Find out how to send data up to this map then we could all get on the map and really start showing our data for all to see before its too late to catch something. I am uploading now to 3 sites and would like to start here as well since here we can see a nice graph of data and any trending....

Profile [AF>Amis des Lapins]CeDriCXD
Avatar
Send message
Joined: 3 Jan 14
Posts: 9
Credit: 0
RAC: 0
Message 2172 - Posted: 9 Jan 2014 | 0:31:21 UTC

Hi
Please tell me how to order a detector - I really would like participate at this project.

Thank you
Greetings from France

Jnargus
Send message
Joined: 8 Feb 14
Posts: 1
Credit: 0
RAC: 0
Message 2345 - Posted: 8 Feb 2014 | 17:21:50 UTC

I just signed up for this project and would love to get two sensors whenever they become available again. I noticed that I missed the last batch by a couple of weeks. Is there any way that I can get on a list to get an email or other notification the next time you order a batch of sensors. I'm willing to assemble a kit or take a fully assembled device.

Thanks

zombu2
Send message
Joined: 18 Feb 14
Posts: 4
Credit: 0
RAC: 0
Message 2363 - Posted: 20 Feb 2014 | 0:57:25 UTC

I would also like to get 1 or 2 of those

just signed up to make sure i don t miss anything
so if someone could contact me on how to get on the list i would apreciate it

ShortlegCats
Avatar
Send message
Joined: 21 Dec 12
Posts: 38
Credit: 0
RAC: 0
Message 2364 - Posted: 20 Feb 2014 | 2:40:02 UTC

Welcome to the forums to the last few members who posted above.

To start off, the best way to find out about potential future orders is to check the news forum periodically (unless admins state otherwise). Currently, there is no "waiting list" for future orders.

Generally, a post is made when they are gearing up to take (pre) orders.

Right now, to my knowledge, the organizers are awaiting for shipments of some of the remaining parts for the kits, and making sure all is good before shipping them out.


zombu2
Send message
Joined: 18 Feb 14
Posts: 4
Credit: 0
RAC: 0
Message 2369 - Posted: 22 Feb 2014 | 2:56:21 UTC - in response to Message 2364.
Last modified: 22 Feb 2014 | 2:57:07 UTC

gotcha thnx for letting us know i can t wait for the hardware to be ready to be shipped

my rpi is waiting to be plugged in

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 2372 - Posted: 22 Feb 2014 | 18:21:23 UTC - in response to Message 2364.

Welcome to the forums to the last few members who posted above.

To start off, the best way to find out about potential future orders is to check the news forum periodically (unless admins state otherwise). Currently, there is no "waiting list" for future orders.

Generally, a post is made when they are gearing up to take (pre) orders.

Right now, to my knowledge, the organizers are awaiting for shipments of some of the remaining parts for the kits, and making sure all is good before shipping them out.



Exactly. Thank you for informing while I'm (or other team members) away. :)
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

Tamara
Send message
Joined: 9 Sep 13
Posts: 33
Credit: 186
RAC: 0
Message 2393 - Posted: 3 Mar 2014 | 15:14:21 UTC - in response to Message 1172.

Within a few days are going to announce a new collection of orders for our volunteers.
As before, we will collect your order from you for about a month and then proceed to the production of sensors. New batch will be about 250 - 300 pcs.

With this collection, will launch a new model.


Despite the changes on CPU and a few other expensive changes, we managed to keep the price at the same level of 27 Euro.

Also with new release we will publish diagrams and software on our website.

Be patient and give us just few days to organise ;)




Hello Krzysztof
im happy that you are again here.

Maby you can tell some about the new sensor that you postet last year in June.

I`m still Interested to purchase one of the new sensors.

Regards, Tamara
____________

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 2394 - Posted: 3 Mar 2014 | 17:32:00 UTC - in response to Message 2393.

The new batch is problematic at the moment.
On one (brighter) side, Ryszard Korczyk have nearly prepared batch of 100 detectors, in other side - he have absolutely no time to finish it...

At the moment I can't tell you when the new batch will be available :/
____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

enkidu
Send message
Joined: 8 Mar 14
Posts: 1
Credit: 0
RAC: 0
Message 2403 - Posted: 8 Mar 2014 | 21:46:28 UTC

Hi there!
I live in the United Kingdom.
In a place that is (regretfully) just in a half way between Bradwell and Sizewell nuclear power plants. I hope that this location may be interesting to you.
I work in the "internet business". I have got my server (on Centos) running at all times.
I would love to join your project. I would gladly purchase one of your detectors. I know that the usual price is about 27 euros. I would gladly pay a little bit more if necessary.
Please kindly answer at enkidu@enkidu-wd.o.uk

I am from Toruń. You may answer in Polish if you would like to.

Nuadormrac
Send message
Joined: 7 Jul 12
Posts: 24
Credit: 0
RAC: 0
Message 2404 - Posted: 9 Mar 2014 | 0:56:27 UTC

Unfortunately for you, the current batch of 100 has already been pre-ordered, and paid for in advance, by other individuals who have also waited for a chance to buy a detector. This leaves two options:

- Wait for them to have another batch, and monitor the forums here regularly. When it comes close to the time that a new batch of detectors will be released, notice is made, and pre-orders are opened up.

- There is a thread in another forum here, for getting a pre-purchased detector to work with the project. This is however a lot more expensive then the detectors that are developed here...

zombu2
Send message
Joined: 18 Feb 14
Posts: 4
Credit: 0
RAC: 0
Message 2406 - Posted: 9 Mar 2014 | 13:32:48 UTC - in response to Message 2404.

if i can get a layout and a parts list i go and get my own stuff and assemble it

it would even be better if we could contact the pcb manufacturer by ourselves and start ordering complete pcb's

the manufacturer could hold the order until he has a batch of 100 or 200 and then send em out and i m pretty sure we could get them to put the smd and chips on it as well

then nobody would have to wait ages to get one of those detectors

just an idea

Profile krzyszp
Project administrator
Project developer
Project tester
Project scientist
Avatar
Send message
Joined: 16 Apr 11
Posts: 355
Credit: 445,005
RAC: 135

Message 2407 - Posted: 9 Mar 2014 | 16:00:23 UTC - in response to Message 2406.

if i can get a layout and a parts list i go and get my own stuff and assemble it

it would even be better if we could contact the pcb manufacturer by ourselves and start ordering complete pcb's

the manufacturer could hold the order until he has a batch of 100 or 200 and then send em out and i m pretty sure we could get them to put the smd and chips on it as well

then nobody would have to wait ages to get one of those detectors

just an idea

All data are available, just search it on main site or forum...
Or, just follow a link:
http://radioactiveathome.org/files/Rad-firmware.zip
There is not only firmware but all required data including PCB layout...


____________
Regards,
Krzysztof 'krzyszp' Piszczek
Android Radioactive@Home Map
Android Radioactive@Home Map - donated
My Workplace

motpfofs
Send message
Joined: 18 Jul 14
Posts: 1
Credit: 0
RAC: 0
Message 2834 - Posted: 18 Jul 2014 | 17:03:32 UTC

I would also like to get one of those sensors
can you tell me, please, how can i order it?

James C
Send message
Joined: 18 Jul 14
Posts: 2
Credit: 0
RAC: 0
Message 2835 - Posted: 18 Jul 2014 | 20:51:17 UTC

Hello, another new comer. Very interested in getting involved. Please PM/School me with details.

dzvo
Send message
Joined: 6 Aug 14
Posts: 2
Credit: 0
RAC: 0
Message 2866 - Posted: 6 Aug 2014 | 9:03:58 UTC

Hallo in die Runde,

bei einer neuen Besstellrunde wäre ich auch gerne mit 2 Geräten dabei.

Grüße
dzvo

Profile ChristineMeany
Send message
Joined: 12 Jan 18
Posts: 10
Credit: 0
RAC: 0
Message 3625 - Posted: 12 Jan 2018 | 10:49:06 UTC - in response to Message 1172.

And what pluses has this model?

ooomsorg6
Send message
Joined: 17 Aug 17
Posts: 2
Credit: 0
RAC: 0
Message 3655 - Posted: 16 Mar 2018 | 14:47:48 UTC

Why OOOMS.ORG?

There are many Internet Marketplace websites offering free classifieds,business directory and service providers. But Free Classifieds Ads & Business Directory oooms.org stands out because we also provide opportunities for growth and development through investment.

We offer you an opportunity to promote and grow your business when listed in our business directory . You can post your Business and most importantly we can facilitate exposure of your business to potential investors.

If You have unfinished projects, you also can post in our website for potential Investor.
We are not just a Free Classifieds Ads & Business Directory Website. We are connecting People.

AFRICA CARIBBEAN LATIN AMERICA PACIFIC MIDDLE EAST SCANDINAVIA EUROPE CANADA USA ASIA

Profile ChertseyAl
Avatar
Send message
Joined: 16 Jun 11
Posts: 149
Credit: 375,519
RAC: 150

Message 3658 - Posted: 16 Mar 2018 | 18:52:22 UTC - in response to Message 3655.

Why OOOMS.ORG?




Oooms.org are a bunch of spamming cunts apparently.



____________

jawashop
Send message
Joined: 27 Mar 18
Posts: 3
Credit: 0
RAC: 0
Message 3663 - Posted: 27 Mar 2018 | 4:47:47 UTC - in response to Message 3658.

I like artikel http://obatkuat.tokoobatjawa.net/blog/tissue-magic-untuk-wanita

jawashop
Send message
Joined: 27 Mar 18
Posts: 3
Credit: 0
RAC: 0
Message 3664 - Posted: 27 Mar 2018 | 4:48:04 UTC - in response to Message 3658.
Last modified: 27 Mar 2018 | 4:50:29 UTC

jual kondom ultimate love sleeve - http://tokoobathargamurah.com/kondom-dan-ring/kondom-bercabang-ultimate-love-sleeve-silicon.html

jawashop
Send message
Joined: 27 Mar 18
Posts: 3
Credit: 0
RAC: 0
Message 3665 - Posted: 27 Mar 2018 | 4:48:33 UTC - in response to Message 3658.
Last modified: 27 Mar 2018 | 4:51:59 UTC

artikel yes like http://tokoobatjawa.net/

Profile ChertseyAl
Avatar
Send message
Joined: 16 Jun 11
Posts: 149
Credit: 375,519
RAC: 150

Message 3666 - Posted: 27 Mar 2018 | 16:44:37 UTC

Wrong day mate, Friday is spamming fucktard day.


____________

divorcestats0
Send message
Joined: 27 Nov 17
Posts: 2
Credit: 0
RAC: 0
Message 3681 - Posted: 20 May 2018 | 17:32:43 UTC - in response to Message 1172.

Looks really good :)

divorcestats0
Send message
Joined: 27 Nov 17
Posts: 2
Credit: 0
RAC: 0
Message 3682 - Posted: 20 May 2018 | 17:37:33 UTC - in response to Message 1172.

Looks really good :)

Profile ChertseyAl
Avatar
Send message
Joined: 16 Jun 11
Posts: 149
Credit: 375,519
RAC: 150

Message 3684 - Posted: 21 May 2018 | 22:35:51 UTC - in response to Message 3682.


Looks really good :)





____________

caiusloius
Send message
Joined: 31 Aug 14
Posts: 2
Credit: 0
RAC: 0
Message 3694 - Posted: 18 Aug 2018 | 23:40:01 UTC - in response to Message 3684.

Is it possible to get a detector?

Post to thread

Message boards : News : New detectors release soon!


Main page · Your account · Message boards


Copyright © 2018 BOINC@Poland | Open Science for the future